Influence of absorbing layers on the average dose and dose uniformity during irradiation with 1–3 MEV electrons

Capa

Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

Electron beams with energies up to 3 MeV, widely used in technological and research practice, have a relatively low penetration depth into matter, and the nonuniformity of energy absorption can reach 30% per 1 mm of path. High nonuniformity, as well as the high cost of radiation, requires the researcher to have skills in optimizing the uniformity of irradiation and reducing energy losses. This work presents the dependence of the average absorbed dose and dose nonuniformity when irradiating a liquid with a horizontal beam in test tubes or pipes with different glass wall thicknesses (0.2–2 mm Pyrex). The dependencies are applicable to clarify, predict and analyze the distribution of absorbed dose in materials.

Texto integral

Acesso é fechado

Sobre autores

A. Bludenko

A.N. Frumkin Institute of Physical Chemistry and Electrochemistry, RAS

Email: ponomarev@ipc.rssi.ru
Rússia, Moscow

A. Ponomarev

A.N. Frumkin Institute of Physical Chemistry and Electrochemistry, RAS

Autor responsável pela correspondência
Email: ponomarev@ipc.rssi.ru
Rússia, Moscow

Bibliografia

  1. Berejka A.J., Cleland M.R., Walo M. // Radiat. Phys. Chem. 2014. V. 94. P. 141.
  2. Ponomarev A.V. // Radiat. Phys. Chem. 2016. V. 118. P. 138.
  3. Chmielewski A.G. // Radiat. Phys. Chem. 2023. V. 213. P. 111233.
  4. Ponomarev A.V., Ershov B.G. // Environ. Sci. Technol. 2020. V. 54. P. 5331.
  5. Yuri Kim, Ershov B.G., Ponomarev A.V. // High Energy Chem. 2020. V. 54. P. 462.
  6. Pikaev A.K. // High Energy Chem. 2001. V. 35. P. 367.
  7. Woods R., Pikaev A. Applied radiation chemistry. Radiation processing. NY: Wiley, 1994.
  8. Gryczka U., Zimek Z., Walo M., Chmielewska-Śmietanko D., Bułka S. // Appl. Sci. 2021. V. 11. P. 11194.
  9. Gromov A.A., Zhanzhora A.P., Kovalenko O.I. // Meas. Stand. Ref. Mater. 2022. V. 17. P. 23.

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML
Baixar
2. Fig. 1. Cross-section of a test tube and the corresponding “depth–dose” curve. F is the thickness of the beam window foil (μm); dtube is the inner diameter of the test tube (liquid thickness, mm); tw is the thickness of the test tube wall (mm); djet is the thickness of the jet (mm); dtray is the thickness of the liquid in the cup (mm); A is the position of the film dosimeter during preliminary dosimetry. The air gap is not shown.

Baixar (253KB)
Metadados
3. Fig. 2. Dependence of the average absorbed dose Dav on dtube (tw = 0.5 mm) at E = 1 MeV and different foils.

Baixar (95KB)
Metadados
4. Fig. 3. Dependence of the average absorbed dose Dav (a) and the index DD (b) on the diameter dtube and the thickness of the glass wall tw in a test tube at E = 1 MeV and F = 40 μm Al.

Baixar (143KB)
Metadados
5. Fig. 4. Dependence of the average absorbed dose Dav (a) and the index DD (b) on the diameter dtube and the thickness of the glass wall tw in a test tube at E = 2 MeV and F = 40 μm Al.

Baixar (203KB)
Metadados
6. Fig. 5. Dependence of the average absorbed dose Dav (a) and dose variation (b) on the diameter dtube and the thickness of the glass wall tw in a test tube at E = 3 MeV and F = 40 μm Al.

Baixar (189KB)
Metadados

Declaração de direitos autorais © Russian Academy of Sciences, 2024