Шығарылым |
Атауы |
Файл |
№ 1 (2025) |
Analysis of risks of loss of vehicle stability during oscillatory process of impact on steering control |
 (Rus)
|
Berezhnov М., Zhileykin М.
|
№ 4 (2024) |
Analysis of fractal parameters of surface topologies of microstructures with stochastic properties |
 (Rus)
|
Kulikov V., Kulikov А., Khranilov V.
|
№ 1 (2025) |
The influence of the control law on oscillatory processes in an electromechanical drive |
 (Rus)
|
Klimov A.
|
№ 4 (2024) |
Effect on reactivity of silumine melting in dispersion fuel elements of nuclear reactors at acceleration on instantaneous neutrons |
 (Rus)
|
Bogomolov D., Kresov D.
|
№ 4 (2024) |
Influence of various factors on the driver’s assessment of the road condition |
 (Rus)
|
Markovnina A., Kapustin A., Makarov V.
|
№ 1 (2025) |
Dynamic model and method of detecting a single-phase voltage dip based on autocorrelation function and neural network autoencoder |
 (Rus)
|
Wang X., Eliseev V.
|
№ 4 (2024) |
Application identification by network traffic |
 (Rus)
|
Kuznetsov G., Gai V.
|
№ 4 (2024) |
Changes in vehicle's movement surface profile due to snow cover, weathering, melting, deformation of the supporting base, wheel smoothing ability and other processes |
 (Rus)
|
Dmitriev P., Anikin A., Molev Y., Vakhidov U., Korostelev S.
|
№ 1 (2025) |
Study of factors determining the choice of type and load capacity of logging loading and transport vehicles |
 (Rus)
|
Klubnichkin E., Klubnichkin V., Naumov V.
|
№ 4 (2024) |
Quasi-linearization of a nonlinear model of an unmanned aerial vehicle |
 (Rus)
|
Shabashov A., Plotnikov A.
|
№ 4 (2024) |
Integrated technology for ensuring stability of a robot model with a three-wheel propulsion |
 (Rus)
|
Dyakov A., Fedorov D., Rakimzhanov N.
|
№ 4 (2024) |
A method for investigating the profile patency of a mobile robot during the design phase |
 (Rus)
|
Naumov V., Sarach E., Stadukhin A., Rusakov B.
|
№ 1 (2025) |
Method for determining the stiffness of arbitrary-shaped anti-roll bar |
 (Rus)
|
Мавлонов M., Chetverikov M.
|
№ 1 (2025) |
Image morphological analysis methods for detecting defects in coatings |
 (Rus)
|
Kiyashchenko V.
|
№ 4 (2024) |
Optimization of the flow part of a magnetohydrodynamic filter based on numerical simulation using a CFD-code |
 (Rus)
|
Sobornov A., Ryazapov R., Matsin N., Kotin A., Vorobyev I., Terekhin A.
|
№ 4 (2024) |
Assessment of third physical safety barrier integrity in the event of upper block fall onto the reactor |
 (Rus)
|
Goryunov O., Semakova A.
|
№ 4 (2024) |
Efficiency evaluation of developed fairing for a light commercial vehicle |
 (Rus)
|
Vashurin A., Kolin A., Orlov L., Kulepov V., Manyanin S.
|
№ 1 (2025) |
Practical uses of method of phase velocity conditional extremum in analysis of vehicle movement in traffic flow |
 (Rus)
|
Chernyshov A.
|
№ 1 (2025) |
Hydrostatic transmission control algorithms development using real-time imitational model |
 (Rus)
|
Buzunov N., Muravyev A., Pirozhkov R.
|
№ 1 (2025) |
Development and implementation of software tools for regression testing of algorithms in solving production planning problems |
 (Rus)
|
Afraimovich L., Kulikov M., Kumagina E., Prilutskii M., Starostin N.
|
№ 4 (2024) |
Improving the design of the water pumping ejection system of a promising amphibian vehicle |
 (Rus)
|
Trusevich I., Abdulov S., Taratorkin I., Derzhansky V.
|
№ 1 (2025) |
Testing of multi-loop circuit in natural circulation mode of lead-bismuth coolant |
 (Rus)
|
Pribaturin N., Lobanov P., Kurdyumov A., Svetonosov A., Chinak A.
|
Нәтижелер 22 - 1/22 |
|